Home > Planning > Trees and hedges > Remove a tree within a conservation area

Remove a tree within a conservation area

Trees within conservation areas are automatically protected from being cut down or pruned unless written notice (by letter or email) of the proposed tree works has first been served on the local planning authority. This is because the trees may contribute to the special character of the conservation area. The purpose of the notice is to allow the tree’s contribution to the visual amenity of the area to be assessed.

Apply for consent to remove a tree

To apply for consent to remove a tree within a conservation area you can either:

The council has six weeks from the date of receiving the notice to determine whether or not the proposed works would adversely affect the appearance of the tree and/or the visual amenity value of the locality. If it is determined that the proposed works are inappropriate a tree preservation order will be made to protect the tree. Otherwise you will be notified that the intended work is acceptable.

You do not normally need consent to cut down or do work to trees that are:

  • less than 75mm in diameter (measured 1.5m above ground)
  • less that 100mm in diameter (measured 1.5m above ground), if it is to help the growth of other trees
  • a tree that is dead or dangerous
  • a fruit tree, grown for fruit production

To ensure there is no misinterpretation of the above, it is advisable to contact the council before carrying out any work. All work should be carried out in accordance with good arboricultural practice.

If you deliberately destroy a protected tree, or damage it in a manner likely to destroy it, you could be liable to a fine.